In today’s context, where the carrosserie must be more competitive than ever, working well is not enough: it is essential to do so in an optimal, efficient way and with total control over every productive minute.
This is where SINNEK’s high-efficiency SPEEDFLOW SYSTEM process redefines the concept of productivity in the carrosserie, taking repair time optimisation to a new level.
If your goal is to improve the workflow, reduce operating costs and increase the daily productivity of your carrosserie, SPEEDFLOW SYSTEM is specially designed for you.
What does the SPEEDFLOW SYSTEM process consist of?
SPEEDFLOW SYSTEM is a high-efficiency process composed of latest-technology products, whose main objective is clear: To minimise the vehicle’s stay in the carrosserie and maximise the profit from each repair.
It’s that simple.
It is a solution designed for carrosseries with a high daily workload and the need for fast deliveries, without margin for error.
SPEEDFLOW SYSTEM minimises the vehicle’s stay in the carrosserie and maximises the profit from each repair
SPEEDFLOW SYSTEM is not just a system that integrates high-performance and high-tech products.
Its reason for being is to provide a workflow that turns every minute into a competitive advantage for the carrosserie.
More vehicles repaired, more profitability for your business.
Advantages of use in the carrosserie
Productive time is the most valuable and, at the same time, the most limited resource in the carrosserie sector.
Each car that occupies the booth longer than necessary represents a lost opportunity to repair another vehicle, as well as higher energy consumption, and even a potential loss of a customer due to delivery delays.
SPEEDFLOW is a process focused on turning every minute into a competitive advantage for the carrosserie
With SPEEDFLOW SYSTEM, the goal is to reverse that equation thanks to:
- Drastic reduction in cycle time: Reduces the vehicle’s time in the booth, increasing carrosserie turnover.
- Optimisation of opportunity cost: You don’t waste resources on waiting, re-works or prolonged drying processes. It optimises the opportunity cost of the workflow and makes the most of tools, preparation areas and the booth.
- Energy savings: Composed of products with ultra-fast drying cycles: the perfect ally to reduce energy consumption.
- Increased productivity: More cars ready in less time without compromising the quality of the finish.
And all this while maintaining the excellence of finish that characterises SINNEK.
How the SPEEDFLOW SYSTEM process is structured: the products that comprise it
Below we detail the key components of the system and in which phase or type of repair each one is integrated:
Ultra-fast foundation preparation
For foundation preparation, SPEEDFLOW SYSTEM integrates ultra-fast drying primers, which do not require sanding.
The result? A reduction of up to 40 minutes in the foundation preparation process.
The use of this type of primer minimises waiting times. Its application allows the next step to be carried out without interruptions or unnecessary delays.
Small repairs
For small repairs or spot repair, the SPEEDFLOW SYSTEM process integrates the SPF/UV ultraviolet spray primer.
Its drying in just 30-60 seconds with a UV-A 100 MW/CM2 lamp raises repair productivity to a new level while reducing booth usage.
With just 1 or 2 coats of application, and an evaporation time of around 20 seconds between layers, we will have a perfectly homogeneous surface ready for the application of the colour base.
Painting new or replacement parts
For this type of repair, SPEEDFLOW SYSTEM employs the PW/ wet-on-wet primer.
This primer, available in 3 different shades (PW/9110 – WHITE, PW/7040 – GREY, PW/7016 – DARK GREY), provides excellent coverage without the need for sanding.
With a smooth and satin appearance, it provides a surface that is dry and ready for painting in just 20-30 minutes after application.
Colour application
For the colour base application process, naturally, SPEEDFLOW SYSTEM uses the W6000 SERIES water-based basecoat system, which, in combination with the SO/5100 ACCELERATOR ADDITIVE, allows the evaporation time of the colour base to be reduced by around 20-30%, optimising its performance even in conditions of high humidity and/or low temperature.
This combination of products facilitates lower energy consumption and greater productivity for each repair.
As a result, we will have a regular, homogeneous surface with high coverage and excellent integration between parts, which will minimise the need for re-works as much as possible.
Lacquering with maximum productivity
Depending on the type of repair and the objectives established for it, SINNEK’s SPEEDFLOW SYSTEM contemplates two different routes:
Maximum curing speed
If the main objective is to speed up the curing and drying speed for an ultra-fast delivery, we will use CC/1800 Ceramic Plus clearcoat.
This high-performance clearcoat, in combination with the HA/8070 ultra-fast hardener and the PUR AC/1650 accelerator additive, allows the surface to dry in just 5-10 minutes at 60ºC.
The CC/1800 Ceramic Plus clearcoat allows for increased repair efficiency, thanks to the possibility of handling the vehicle just one hour after its application.
Ultra-fast drying
On the other hand, if we are looking for ultra-fast drying to make deliveries in record time, the best solution will be the UHS Express CC/1770 clearcoat.
A product that guarantees great gloss and depth, without sacrificing durability and surface resistance.
Both clearcoats are compatible with the new SO/8520 blending additive, which facilitates perfect finishes on small repairs.
Conclusion: planned productivity as the key to success
Profitability does not come just from adjusting prices or reducing margins. It comes when every carrosserie process works in your favour, when time optimisation becomes an ally and not a burden.
If you want to optimise your productivity and minimise the vehicle’s stay in the carrosserie, it will be essential to establish work processes that facilitate the measurement and scaling of your business.
And this is where SINNEK SPEEDFLOW SYSTEM, based on a clear and structured process, can help you.
High-efficiency SINNEK processes
At SINNEK, we have other high-efficiency processes specially designed for different objectives:
- ENERGY SAVING SYSTEM: Turns every repair into a smart savings opportunity.
- ULTRA GLOSS SYSTEM: Takes the concept of premium finish to a new level.
- SPEEDFLOW SYSTEM: High productivity to minimise the vehicle’s stay in the carrosserie.
- LOW IMPACT SYSTEM: A perfect balance between maximum quality and the highest sustainability.